NBA

Accredited Branches
by NBA, New Delhi
UG-ECE, CSE, ISE
(Validity up to June 2026)
UG-EEE
(Validity up to June 2027)

NAAC

Accredited with A Grade

CET Code: E133
COMEDK Code: E055

ELECTRONICS & INSTRUMENTATION ENGINEERING | RESEARCH CENTER

Home

About The Department :

The Department of Instrumentation Technology was established in the year 2006-07 with an annual intake of 60 students and renamed as Electronics and Instrumentation Engineering in the year 2014. The Department has been accredited by NBA, New Delhi for a period of 3 years (2017-18 to 2019-2020) and affiliated to Visvesvaraya Technological University, Belagavi and approved by AICTE, New Delhi. The Department has three hi-tech classrooms with projectors and well equipped laboratories with the latest software and hardware facilities required for the fulfillment of the curriculum and also to take up innovative projects.

The department caters to the ever challenging needs of technical excellence in all areas of Electronics Instrumentation with a perfect blend of industrial exposure, coupled with good technical base. The department has qualified and experienced faculty and technically competent supporting staff on its role. The infrastructure and lab facilities are upgraded from time to time and provide adequate opportunities for students to learn and innovate. The department is actively engaged in industry-institute interaction. The department is vibrant in conducting Seminars, Workshops, and Industrial visits for the continuous growth of students.

Intake of the Department = 60

Vision:

To achieve excellence in technical education and research to serve as a valuable resource center for industry and society through innovation and team work leading to global competence.

Mission:

M1. To provide students with technical knowledge, practical and managerial skills t

hat will enable the graduating engineers to serve the society better with ethical values. 
M2. To undertake synergetic projects which offers opportunities for long term interaction with academic and industry. 
M3. To prepare the students to visualize beyond the stochastic thinking and belong to a new era of acquisition and application of instrumentation technology to meet the requisition of the changing world.

Program Educational Objectives (PEO'S) :

PEO1. To provide a strong foundation in the field of Instrumentation Technology to analyze and solve the engineering problems. 
PEO2. Pursue their higher studies at the reputed institutes in India and abroad and work in educational institutions, research organizations and engineering consultancy companies or to become entrepreneur. 
PEO3. Communicate and work effectively as individuals or in professional teams. 
PEO4. Exhibit professionalism, ethical attitude and adapt for current trends and upgrading technology by fascinating in lifelong learning. 
PEO5. Motivate graduates to become good human beings and responsible citizens for the overall welfare of the society.

 

Program Outcome Based on NBA Graduate Attributes :

PO1: Ability to apply knowledge of mathematics, science and engineering to solve complex problems.
PO2: Ability to identify and analyze a problem and formulate appropriate solutions in the field of Instrumentation Technology.
PO3: Ability to apply current knowledge and adapt to upgrading Technology for quality, timeliness, continuous improvement and specific needs for the industries.
PO4: Ability to have competency to develop necessary model, simulate and implement solutions relating to instrumentation engineering.
PO5: An ability to use the techniques, skills, and wide range of modern software tools related to instrumentation engineering for design, development, simulation, implementation, verification and certification.
PO6: An ability to understand professional, social responsibilities and social issues associated with different courses of action.
PO7: Impact of the professional engineering solutions in societal and environmental contexts and demonstrate the knowledge and need for sustainable development.
PO8: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.
PO9: Function effectively as an individual, and as a member or leader in diverse teams and in multidisciplinary settings.
PO10: Ability to communicate effectively through a written documents/ oral presentations and to develop, prepare, interpret effective visual and graphical information in global scenario.
PO11: Ability to lead project team by incorporating appropriate engineering and management principles for successful completion of project in multidisciplinary environment.
PO12: Self improvement through the continuous professional development and ability to engage in independent and lifelong learning.

Program Specific Outcomes

PSO1: Students will have the ability to explore the concepts of measurement and sensor selection to
Identify, and troubleshoot various process instruments commonly used in automation industry.

PSO2: Enables the Students to design the elements of a control system from a practical, working
perspective, and comprehend how these elements affect overall system operation and tuning in
measurement and instrumentation.

 About Course :

The Department is offering B.E. degree course in “Electronics & Instrumentation Engineering”, which is a multi-disciplinary branch of engineering, dealing with the science and technology of measurement of a large number of variables embracing the engineering disciplines like electrical, electronics, mechanical, communication and computer engineering. In today’s world of technological advancements Instrumentation Technology plays a vital role like aircraft instrumentation, biomedical instrumentation, distributed control systems, process controls and robotics. Knowing the ever growing importance & fast changing technical requirement of measurement and analysis, computers, electronic instrumentation, electronics circuits, power electronics, analog and digital systems, microprocessors, microcontrollers, digital signal processors (DSP) and programming languages are very essential. Analytical, mathematical, conceptual and practical skills are essential for an Instrumentation Engineer. All industries require controls and measurements of equipments and parameters leading to automation of industrial processes. Accurate and reliable measurements lead to better quality of products. Hence, quality of measurement and instrumentation is an important aspect studied during the course.

Distribution of EIE Course Content | GSSSIETW

Distribution of Course Content


Research Center

Visvesvaraya Technological University, Belagavi, has granted the approval of RESEARCH CENTER for the year 2016-17 under Electronics and Instrumentation Engineering program (Ref wide: VTU/Aca-Res-Cen/2016-17/8241 Dated 27th Jan 2017)

Sl No

Supervisor

Name of Research candidate

Topic

Year of Registration

Status

1

Dr.M.Shivakumar
Professor & Principal
GSSSIETW, Mysuru

 

 

Mr. Gavisiddappa, Associate Professor in ECE Dept, CBIT, Gubbi

An approach to integration of multiple cues in biometric to improve the accuracy of system

2013

Awarded

2

Mr. M V Sreenivas Rao, Associate Professor, Dept of EIE, GSSSIETW, Mysuru

Analysis of Battery Packs and Development of Autonomous Recharging for Mobile Robots

2014

Awarded

3

Mr. Basavanna.M Assistant Professor, Dept of EIE, GSSSIETW, Mysuru

An Approach to Avoid Quasi Dynamic Obstacles in an Indoor Environment Using Multi-Sensor Information Fusion

2015

Awarded

4

Mr. Theertha Prasad BMRCL, Bangalore  

An approach for image based obstacle avoidance and WSN based path planning in mobile robot

2016

Partially Cleared Course Work Exam

30303031

Contact :

Dr. Shivakumar. M,
Principal & Professor
Department ofElectronics & Instrumentation Engineering
GSSS Institute Of Engineering & Technology For Women
E-mail : This email address is being protected from spambots. You need JavaScript enabled to view it.
Phone : 0821-4257304/05/06 (Extn 408)

 

 


Robotics Lab

Innovative Robotics Awareness Lab :

Vision Group on Science and Technology (VGST), Department of Information Technology, Biotechnology and Science & Technology, Government of Karnataka has sanctioned a grant of Rs. 30 Lakhs under CISEE program for the proposal titled “Establishment of Innovative Robotics Awareness Lab” with Dr.M.Shivakumar, Professor & Principal, GSSSIETW, Mysuru as programme coordinator.
The Innovative Robotics Awareness Lab being setup at GSSSIETW aims to have lab setup for various fundamental experiments on robotics, provides self building of simple robots performing various operations as per the commands given through software data, voice commands, sensory commands etc. B.E Students of GSSSIETW have carried out the project works namely Robotic 2D Plotter , Reactive Navigation of Multiple Moving Agents in a room Environment and Stuttered Speech Recognition for Robotic Control, Optimal Path Planning With Obstacle Avoidance For An Autonomous Robot, Overtaking Assistance Using Image Processing, Obstacle avoidance, battery charge monitoring and docking of autonomous Robot, Augmentative and alternative communication (AAC) device for people with communication disorder, Conversion of Speech to Text for Hearing Impaired people, Hand gesture controlled Robot, Docking and self-recharging of autonomous mobile Robot and Real Time Driver Drowsiness Detection and Alert System.

Mr. M.V. Sreenivas Rao who is working as Associate Professor and Mr. Basavanna.M, who is working as Asst. Professor in the Dept. of Electronics & Instrumentation Engineering of our institute are pursuing their Ph.D in the field of Mobile Robotics under the guidance of Dr.M.Shivakumar, Professor & Principal, GSSSIETW, Mysuru
The major procurements in the robotics labs are:

Sanctioned VGST-CESEM Sponsored project “Centre for Research in Cyber Physical Virtual Reality based Embodied AI Robotics” with a grant of Rs. 40 Lakhs at GSSSIETW, Mysuru from 2021-23.

Basic Embedded Systems and Robotic Lab setup :

  • It mainly consists of FireBird V 2560, Spark V Robot, accessories, communication modules and the Sensors like Infrared range sensor, Ultrasonic range sensor, 3 axis digital accelerometer, three axis magnetometer and Gyroscope.

Advanced Embedded Systems and Robotic Lab setup :

  • FireBird V 8051 robot, FireBird V LPC2148 robot, FireBird V Hexapod and Dexter ER2 robotic arm.

Robotic Research Platform using FIRE BIRD VI :

  • Fire Bird XI is reliable, versatile and rugged robot for the advance research in robotics.

Image Processing Platform :

  • It consists of Robo Realm Software and WowWee Rovio. Robo Realm is an application for use in computer vision, image analysis, and robotic vision systems. WowWee Rovio is the groundbreaking new Wi-Fi enabled mobile webcam that lets you view and interact with its environment through streaming video and audio, wherever you are! With Rovio, you will always be just a click away from the people and places that are important to you.

Robotic kit to perform specific tasks :

  • Using this kit, we can measure distance, follow trails, measure temperature, avoid obstacles Without touching them, recognize day & night and turn headlights on & off.

Robotic kit to perform specific tasks | GSSSIETW

Innovative Robotics Lab | GSSSIETW

Research scholars Mr. M V Sreenivas Rao, Assoc. Professor, Dept of EIE & Mr. Basavanna M, Asst. Professor, Dept of EIE, carrying out research activities in Innovative Robotics Lab.

 

Robotics lab on 19th December 2018 | GSSSIETW

Prof. Ravinder Dahiya, Professor of Electronics and Nano Engineering,EPSRC Research fellow,BEST Group , School of Engineering,University of Glasgow, UK visited Robotics lab on 19th December 2018.


 

Hands on Training for Robotic Competition “ROBOTEER-2018”  held on 28th April 2018

Robotic Competition “ROBOTEER-2018” | GSSSIETW

 

(Sitting from left) M.V.Sreenivas Rao, Associate Professor, Department of E&IE, Dr.M.Shivakumar, Principal, GSSSIETW, Mysuru, Dr. Venkatrathnam Chitturi, Associate Professor & Head, Department of E&IE, GSSSIETW, Mysuru. Standing are the students of 4th semester and faculty members of the E&IE Department.

The Department of Electronics and Instrumentation Engineering, GSSSIETW, Mysuru had organized hands on training for robotics competition “ROBOTEER-2018” on 28th April 2018 under Instrument Society of India (ISOI) Student Chapter for 4th semester E&IE students. The resource person for this program was Mr. M V Sreenivas Rao, Associate Professor, Mr. Nagesh M.S, and Basavanna M Assistant Professors, Dept. of E&IE, GSSSIETW, Mysuru. The training was conducted for one day on the basics of Arduino board and its application on line following robot.

In the morning session, an overview of the Embedded Systems and basics of Arduino board and its applications was presented to the students. The students in the next session built the working model of line following robot using sp duino board, sensors, motors and other accessories and demonstrated its working.

Inauguration of e-Yantra Lab Setup Initiative (eLSI) lab at GSSSIETW

Inauguration of e-Yantra Lab Setup Initiative (eLSI) lab at GSSSIETW

Seen are R. K. Bharath, CEO, GSSS, Dr. Sumithra Devi K A, Principal, GSSSIETW and Dr. M. Shivakumar, Head, Department of Instrumentation Technology, during the online Lab inauguration of “e-Yantra Robotics Lab-Setup Initiative(eLSI)” at GSSSIETW on 14th March 2016.

The Department of Instrumentation Technology of GSSSIETW, Mysuru had organized online lab inauguration of the Robotics Lab which was setup through e-yantra using a grant of Rs.30 Lakhs sanctioned by Vision Group of Science & Technology, Government of Karnataka with Dr. M.Shivakumar as Program Coordinator. e-yantra is a project initiated by IIT-Bombay sponsored by Ministry of Human Resource Department under National Mission of Education through Information and Communication Technology. The ceremony started with an introductory address by Professors from IIT Bombay.


The main objective of the Inauguration is to unite all colleges joining the e-yantra Lab Setup Initiative by inaugurating their individual labs simultaneously through the live web conference. The e-yantra team from IIT, Bombay congratulated GSSSIETW and assured their full assistance in future for any support from their end. The signage board sent by e-Yantra was opened by the dignitaries to symbolically declare lab as an e-Yantra lab. The college had received a free robotic kit which was handed over to the lab team leader Dr. M.Shivakumar by the Principal.

Robotics Awareness lab

 
Robotics Awareness lab | GSSSIETW

Students of various departments carrying out their Final year project work

 

Sl. No. Title Of The Project Students Name
1

Data Acquisition In The Asperous Regions Using Legged Robot 

Amrutha M S, Spoorthy S, Swathi Muralidhar 


 Arduino Based Rotating Head Obstacle Avoidance Robot

 Fayiza Mariyam, Poojashree T J Vinaya S Babu
3  Agricultural Robot

Savitha H, Naba Kawal

4  Docking And Self Charging Autonomous Robot

Dhanyashree R, Suman Bai G, Supriya Gowda M, Victoria Blessy 

Roboteer 2020 for Diploma Students

roboteer2020 1

roboteer2020 2   roboteer2020 3

Department had organized a “Roboteer-2020” for Diploma students on 28th January 2020. The workshop was conducted for one day on the basics of Arduino programming and its application on obstacle avoidance robot. The main aim of this workshop is to give awareness on Engineering and also to give knowledge glimpses on Robotics. Around 85 students (21 teams) from various Diploma colleges in and around Mysuru had participated in this event.  Certificate of participation was distributed to all the participants by Dr M Shivakumar, Principal and Mr. M V Sreenivas Rao, Assoc. Professor and Mrs. Roopa Nandini, Assoc. Professor and Head, Dept. of EIE ,GSSSIETW, Mysuru.

Roboteer 2019

Roboteer 2019 | GSSS Engineering & Technology for Women

Department of Electronics and Instrumentation Engineering had organized Robotics Workshop “Roboteer-2019” for Diploma students on 24 th January 2019.

Around 130 students from various diploma colleges in and around Mysuru had participated in this event. The workshop was conducted for one day on the basics of Arduino board and its application on line following robot. Mr. M V Sreenivas Rao, Assoc. Professor, Mr. Nagesh M S and Mr. Basavanna M Asst. Professor’s Department of E&IE were the resource person for this event. Certificate of participation was distributed to all the participants by Dr M Shivakumar, Principal, GSSSIETW, Msyuru

Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019Roboteer 2019

Inter - college Robotic Event ROBOTEER-2019 held on 01st October, 2019

robortee1 robortee2

 

Mr. M V Sreenivas Rao, Associate Professor and Head, Dept. of E&IE, GSSSIETW, Mr. Sreekanta Aradhya. B, Chief Expert- Industry 4.0 & MES, RBEI/EIA, Robert Bosch Engineering & Business Solutions Limited, Bengaluru, Dr. M Shivakumar, Principal, GSSSIETW, Mysuru and Participants of Roboteer - 2019

The Department of Electronics and Instrumentation Engineering, GSSSIETW had organized Inter-College Robotic event “ROBOTEER-2019” in association with Instrument Society of India (ISOI) Student Chapter, under IQAC, GSSSIETW for the PG & UG students of ECE/EIE/EEE/TCE/CSE/ISE/MECH branches of engineering colleges. The Event is inter-disciplinary in nature and designed to provide both theoretical and practical knowledge for students in Robotics. ROBOTEER event aimed to provide a platform for students to demonstrate their knowledge and programming skills in embedded systems and Robotics. The objective of this Event is to build a robot which can find its way in a maze with walls from start point to finish point with many dead ends. The robot has to reach its destination in minimum time. It is an opportunity for applying the knowledge to solve the given task using the robotic kit provided during the event. The chief guest for the event was Mr. Sreekanta Aradhya. B, Chief Expert- Industry 4.0 & MES, RBEI/EIA, Robert Bosch Engineering & Business Solutions Limited, Bengaluru

Maze solving robotsCertificate distributionwinner_Certificate distributionChief guestRoboteer_2019Roboteer _ 2019 Group photo3Roboteer _ 2019 Group photo2Roboteer _ 2019 Group photo1Falicitation to guestRoboteer _ 2019 Group photo4Roboteer 2020_Jan 28thRoboteer 2020_Jan 28thRoboteer 2020_Jan 28thRoboteer 2020_Jan 28thRoboteer 2020_Jan 28thRoboteer_2020_Diploma_Jan 28th_group photo

MOU

MOU 

 

GSSSIETW Signs a “Memorandum of Understanding” with GTTC, Mysuru

GSSSIETW Signs a MOU with GTTC, Mysuru

 

(From left) Dr. Venkatratnam Chitturi, Head, Department of E&IE, Dr.M.Shivakumar, Principal, GSSSIETW, Sri K. L. Prakash, Deputy General Manager, GTTC (CoE), Mysuru and
Sri R.K . Bharath, CEO & Management Committee Member, GSSS(R),Mysuru.

To motivate and support the students and to enhance their skills and knowledge for the technological upgradation, innovation and competitiveness in the field of Applied Instrumentation, GSSS Institute of Engineering and Technology for Women (GSSSIETW), KRS Road, Metagalli,Mysuruhas signed a Memorandum of Understanding (MoU) with GTTC (CoE), Mysuru on 21st January 2019. The signing of MoU was organized by the Department of Electronics & Instrumentation Engineering. The MoU was signed by Dr.M.Shivakumar, Principal, GSSSIETW and Sri K. L. Prakash, Deputy General Manager, GTTC (CoE), Mysuru in the presence of Sri.R.K.Bharath, CEO and Management Committee Member, GSSSIETW and Dr. Venkatratnam Chitturi, Head, Department of E&IE, GSSSIETW,Mysuru.


GTTC is a premier tool room and training center established by Government of India in 1972.Center of Excellence (CoE) is established by Government of Karnataka through commerce and industries department with Siemens Industry Software India Pvt, Ltd. The objective is to provide training to Engineering students as well as faculty on world class technologies from Siemens. These trainings will greatly benefit the student community in educating them on the latest technologies which is used in the industry through Workshops, Final Year Projects, Industrial Visits, Internship Programs and Skill Development Programs. Students will acquire latest relevant knowledge and best practices of industries. The employability of students shall increase by certification from globally renowned Siemens.

GSSSIETW Signs a “Memorandum of Understanding” with RobotGuru, Mysuru

GSSSIETW Signs a MOU with RobotGuru, Mysuru

(From left) Mr. Sivakumar Subramanian,Partner,RobotGuru,Sri R.K . Bharath, CEO & Management Committee member, GSSS(R), Dr.M.Shivakumar, Principal, GSSSIETW, Mysuru,Harsha, Director, RobotGuru, Mysuru, Dr. Venkatratnam Chitturi, Associate Professor & Head, Department of E&IE, Sri M.V.SreenivasRao, Associate Professor, Department of E&IE, Mr. Stafford Michahial, RobotGuru, Mysuru.


To motivate and support the students and to enhance their skills and knowledge for the technological upgradation, innovation and competitiveness in the field of Robotics, GSSS Institute of Engineering and Technology for Women (GSSSIETW), KRS Road, Metagalli,Mysuru has signed a Memorandum of Understanding (MoU) with RobotGuru, Mysuru on 24th April 2018. The signing of MoU was organized by the Department of Electronics & Instrumentation Engineering.

The MoU was signed by Dr.M.Shivakumar, Principal, GSSSIETW, and Mr.Sivakumar Subramanian, Partner, RobotGuru, in the presence of Sri.R.K.Bharath, CEO and Management Committee Member, GSSSIETW, Mr.Harsha, Director, RobotGuru, Mysuru, Dr. Venkatratnam Chitturi, Associate Professor & Head, Department of E&IE, GSSSIETW,Mysuru.


Robot Guru which seeks to teach robotics in an integrated manner interweaving hardware and software. It focuses on fundamental principles and underlying core technologies like 3D sensing, speech processing, RGBD sensors, Gesture processes and Person tracking. This pioneer in education is a brainchild of innovative experts in the field of robotics who have over 28 patents in US, Europe and Japan. The team has extensive experience in building and programming award-winning consumer and industrial robots apart from mentoring various start-ups in Silicon Valley. RobotGuru, is engaged in Business, Manufacturing, Skill Development, Education and R&D Services in the fields of Robotics, Artificial Intelligence, Machine Learning, Virtual Reality, Augmented Reality, Drones and relatedfields. It trains the student on the emerging technologies in order to bridge the skill gap and make them industry ready, through workshops and final year projects.

216201713

 

A Memorandum of Understanding (MOU) was signed between GSSS Institute of Engineering and Technology for Women (GSSSIETW), Mysuru and “NI Systems India Pvt Ltd.,” regarding LabVIEW Academy Program for the establishment of NI LabVIEW Academy based Competence Development Program.

Memorandum of Understanding with “Gill Instruments Pvt. Ltd.”

GSSSIETW MOU with Gill Instruments Pvt. Ltd.

A Memorandum of Understanding (MoU) was formally signed on 23rd of November 2015 between Department of Instrumentation Technology of GSSS Institute of Engineering and Technology for Women (GSSSIETW), Mysuru and Gill Instruments Pvt. Ltd, Bengaluru, to establish the lab for “Center of Excellence in Applied Electronics”. The signatories of the MoU were Dr. Sumithra Devi K A, Principal, GSSSIETW, Dr Shivakumar M, Professor and Head , IT Dept., GSSSIETW, Mr.Gurjeeth Singh, Managing Director, Gill Instruments, Bengaluru in the presence of Sri R K Bharath, CEO and Management Committee Member, GSSS(R); Sri M V Sreenivas Rao, Asso. Professor Dept of IT graced  the occasion.

Objectives of the MoU :

  • Practical Training for students.
  • To provide Internship for UG students.
  • Academic projects for UG students.

Memorandum of Undertanding with “Yokogawa India Ltd.,”

GSSSIETW MOU with Yokogawa India Ltd.,

A Memorandum of Understanding (MoU) was formally signed on 17th March of 2015 between Department of Instrumentation Technology of GSSS Institute of Engineering and Technology for Women (GSSSIETW), Mysuru and “Yokogawa India Ltd.,”, Bengaluru. The signatories of the MoU were Dr. Sumithra Devi K A, Principal, GSSSIETW, M V Sreenivas Rao, Asso.Professor and Head , IT Dept., GSSSIETW and Mrs. R. Padma, Deputy Manager (Training) Customer Service Division, Yokogawa, India Limited, Bangalore, in the presence of Smt.Vanaja B Pandit, Hon. Secretary, GSSS(R) and Sri R K Bharath, CEO and Management Committee Member, GSSS(R); Smt.Anupama B Pandit, AAO, GSSSIETW; and Smt. Mamatha D.V,Asst.Professor. Dept of IT graced the occasion.

Objectives of the MoU :

  • Conduction of training programs (with hands on sessions) using latest tools and hardware kits in the area of Automation
  • Technical Talk for Students.
  • Academic projects for UG students.
  • Department has signed a MOU with “ Gill Instruments Pvt. Ltd.” to set up “Internet of things(IOT)” Lab, conduct Technical training, workshops on “ Embedded System design” and “ Internet of Things” and Student Internships.

Achievements

University Level Achievers :

university level avhievers | eie | GSSSITEW

 

Departmental Achievers:

Toppers List of VII Semester ODD 2020

Toppers List of V Semester ODD 2020

Toppers List of III Semester ODD 2020

Students Achievements- 2020-2021
 

Sl. no

Title of the event

Student name

Date

1

Awarded of Rs. 5000 from KCST for project entitled & Smart Parking Management System& under the guidance of Mr. M V SreenivasRao.

Ms.BhoomikaBharadwaj H B

Ms.ParnikaArcot Suresh

Ms.Prathibha

April 2021

2

Awarded of Rs. 4000 from KCST for project entitled & Intelligent Interface For Crop Management Using Ai And Iot& under the guidance of Mr.M V SreenivasRao

Ms.Aditi C A

Ms.Divya R

Ms.RanjithaR

Ms.Sukrutha A

April 2021

3

Awarded of Rs. 4000 from KCST for project entitled & Smart Traffic Monitoring System Based On Density using Raspberry Pi and IoT& under the guidance of Mrs. Amrutha R.

Ms.Disha PBayakod

Ms.Janani S

Ms.RakshithaR

Ms.Kavya V

April 2021

4

Awarded of Rs. 6000 from KCST for project entitled & Design and Development of an Autonomous Indoor Wall Painting Robot& under the guidance of Mr. Nagesh M S.

Ms.Shishira M R

Ms.Ranjana N

Ms.Kokila S

Ms.Bhuvanashree T N

April 2021

5

Awarded of Rs. 5000 from VTU for project entitled & Arm Rehabilitation for Stroke patients using wearable sensors& under the guidance of Mr. Nagesh M S.

Ms.Keerthi M R

Ms.Sushmitha C

Ms.Lochana S

Ms.Simran B A

January 2021

6

Awarded of Rs. 5000 from VTU for project entitled & IoT and ML based Health prediction and remedial action using Yoga techniques& under the guidance of Mr.Nagalakshmi T S.

Ms.Shreya G

Ms.Aishwarya K

Ms.Shamitha

Ms.KumariGunjan

January 2021

7

Presented paper titled & Live Video surveillance with mine and Intruder detection combat Robot& in National Symposium on Instrumentation (NSI-42) organized by Instrument Society of India (ISOI)

Ms.MeghanaThorwath V

January 2021

8

Presented paper titled & Green House monitoring and Control System using IoT& in National Symposium on Instrumentation (NSI-42) organized by Instrument Society of India (ISOI)

Ms.Shreelakshmi H S

January 2021

9

Presented a Poster titled & Smart Reverse Vending Machine to feed Stray Dogs& in National Symposium on Instrumentation (NSI-42) organized by Instrument Society of India (ISOI)

Ms.Tanushree M U

January 2021

 
Students Achievements- 2019-2020:
 

Sl. no

Title of the event

Student name

Date

1

Awarded of Rs. 5000 from KCST for project entitled “Robotic aid in segregation of dry, wet and metallic waste in industrial environment” under the guidance of Mr. M V Sreenivas Rao.

Ms. Deepika Dinesh Kumar Bind, Ms. Saibha Khanum, Ms. Sowrabha K M and Ms. Ashwini S of 8th semester

June 2020

2

Students completed the online courses of minimum of 30hrs to maximum of 52.5hrs in Java Programming, Python Course-Boot Camp, Web Development, Python and Django for Full stack web developer, CCN Networking, Python, Raspberry Pi, IoT and Electronics, C#

All 8th semester students

February 2020 to May 2020

3

Participated in IEEE SPS winter school on Biomedical signal and image processing at MSRIT, Bengaluru.

Neelimpa M, Disha Baykod, Srijeeta Dev and Nikitha K N

12th to 14th November, 2019

4

Participated in IEEE Day-2019 held at GSSSIETW, Mysuru.

Parnika Arcot Suresh, Prathibha, Bhoomika Bhradwaj,

Neelimpa M, Disha Baykod and Srijeeta Dev

24th October,2019

5

Participated in inter college competition “Panchatantra” held at VVCE, Mysuru.

Parnika Arcot Suresh, Prathibha, Bhoomika Bhradwaj,

Neelimpa M, Disha Baykod and Srijeeta Dev

18th to 19th October,2019

6.

Participated and Won 2nd prize in Idea Presentation 4th National level Technical Competition “Techno Spectrum” held at GSSSIETW, Mysuru.

Tanushree M U and Raziya Sultana

16th October 2019

7

Participated in Google Hunt in 4th National level Technical Competition “Techno Spectrum” held at GSSSIETW, Mysuru.

Bhoomika Bhradwaj, Parnika Arcot Suresh, Srijeeta Dev and Greeshma

16th October 2019

8

Participated in “Entreprenurship awareness camp” organized by EDC , GSSSIETW,Mysuru.

Disha Baykod and Kokila S

15th to 17th October, 2019

9

Participated in 409th Dasara Tourch Light Parade as a part of scouts/ guide/ranger/rover.

Varsha Sreenivas

8th October 2019

10

Participated and Won 2nd prize in Inter college Robotic competition “Roboteer-2019” held at GSSSIETW,Mysuru.

Preethu K, Shravana K S, Saba Kousar and Megha C D

1st October 2019

11

Participated in Inter college Robotic competition “Roboteer-2019” held at GSSSIETW,Mysuru.

Sushmitha C P, Sadhana B C, Rachana M K,Isha K, Lakshmi N R,Shalini S, Rista Muddiah M.

1st October 2019

12

Participated in Inter college Robotic competition “Roboteer-2019” held at GSSSIETW,Mysuru.

Parnika Arcot Suresh, Prathibha, Bhoomika Bhradwaj,

Neelimpa M, Disha Baykod and Srijeeta Dev

1st October 2019

13

Participated in ACCS event as a part of “Prabandhan-19” held at IIT Kanpur.

Rakshitha R and Janani S

27th to 29th September 2019

14

Participated in Markovista event as a part of “Prabandhan-19” held at IIT Kanpur.

Rakshitha R and Janani S

27th to 29th September 2019

15

Participated in Poster Presentation Competition held during “Engineer’s day celebration” organized by IEEE student branch IEEE affinity group, GSSSIETW, Mysuru in association with IEEE Bangalore section.

Isha K and Rachana M K

16th September 2019

16

Participated in “Feel Employable” Leraning and development Intervention conducted by CLHRD at GSSSIETW, Mysuru.

All 5th semester students

16th to 18th September 2019

17

Participated in Malbar Gold and Diamonds-Golden Girls 2019 Karnataka.

Kokila S and Sushmitha C P

August 2019

 
Students Achievements- 2018-2019:
 
SI. No

Title of the event

Student name Date
1 Attended three days SDP on “Insight to IoT using Arduino and Raspberry Pi” organized by Dept. of CSE and EIE, GSSSIETW, Mysuru. Greeshma G 10th July to 12th July 2019
2

Presented the paper titled “Design and Development of Vehicle Blind Spot using LabVIEW” in the Third National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019)

Rachana N , Shreyanka T and
Pooja M

May 10th , 2019
3

Presented the paper titled “Design and Development of an Embedded Medical Quad - Copter” in the Third National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019)

Hiba Fathima, Sukruthi N S and
Tejaswini M S

May 10th , 2019
4

Presented the paper titled “Data Acquisition in the Asperous Region using Hexapod Robot” in the Third National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019)

Amrutha M S ,  Swathi Muralidhar and Spoorthy S May 10th , 2019
5

Presented the paper titled “Smart Prepaid Energy Meter IoT based” in the Third National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019)

Syeda Afreen Saher, Tejaswini A,
Shreya Goel D and Varsha S

May 10th , 2019
6

Presented the paper titled “Monitoring of Coma Patient using Wearable Motion Sensor Systems” in the Third National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019)

Asma Shaikh ,  Sufia and  Deepthi K N May 10th , 2019
7

Presented the paper titled “Women Safety Device using IoT” in the Third National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019)

Raziqua M, Sowmya C,
Vinuthalakshmi K and Priyanka N

May 10th 2019
8

Presented the paper titled “Pollution Checker Drone” in the Third National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019)

Feedha Rafeeque,  Vaishnavi Diggavi and Rakshitha N May 10th 2019
9

Presented the paper titled “Remote Monitoring of Solar Panels using LabVIEW” in the Third National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019)

Bhagyajyothi M Patil,
M Manimekala and Pooja H N

May 10th 2019
10

Presented the paper titled “Design of Anti Theft System for Bikes” in the Third National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019)

Asha G P,  Niveditha  B R and  Kadambini K R May 10th 2019
11

Presented the paper titled “Smart Irrigation System using Solar Panel” in the Third National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019)

Bindushree C D,  Ghousia Neha and  Varshini S May 10th 2019
12

Presented the paper titled “Smart vision for visually impaired people using Machine Learning” in the Third National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019)

Mamatha Rani M S,  Vinutha K and  Yogitha S P May 10th 2019
13

Awarded Best Paper entitled “Smart vision for visually impaired people using Machine Learning” in Project Symposium

Mamatha Rani M S,  Vinutha K and  Yogitha S P May 11th 2019
14

Participated in Project Model and Technical Paper presentation completion held by IETE, Mysuru

Raziqua ,  Priyanka and Sowmya May 4th 2019
15

Participated in Project Model and Technical Paper presentation completion held by IETE, Mysuru

Mamatha Rani M S, Vinutha K and
Yogitha S P

May 4th 2019
16

Participated in “SYMBIOT”state level Hackathon organized by Dept. of ECE, Vidya Vardhaka college of Engineering, Mysuru

S Sumi,  Surabhi M S,  Spoorthi M Pawar and Prateeksha M May 3rd & 4th 2019
17 Participated in TECH JUMANJI , TECH RIG, QUIZITIVE events in National Level Technical Fest URJA-2K19  organized by Dept. of ECE,ATME College of Engineering, Mysuru in association with “IETE”, Mysuru 2019 S Sumi,  Surabhi M S, Kumari Gunjan, Raveena A, Safna M T March 21st & 22nd 2019
18 Participated in “MATLAB Workshop” held at National Institute of Engineering , Mysuru

Usha M, Sushmitha C,
Nisha C and Preethi K

1st March 2019
19 Won Second Place in “Mind Numbing Quiz” at SCI-FEST-19 under TEQIP-III on occasion of Nation Science day organized by Department of Chemistry, SJCE,JSS S&TU, Mysuru

Spoorthi M Pawar and
Surabhi M S

28th Febraury2019 & 1st March 2019
20 Participated in SCI-FEST-19 under TEQIP-III on occasion of Nation Science day organized by Department of Chemistry, SJCE, JSS S&TU, Mysuru

Prateeksha M, S Sumi, Safna M T,
Kumari Gunjan, Raveena A and Tanushree M

28th Febraury2019 & 1st March 2019
21 Participated in a celebration of knowledge at “India’s Largest Campus Quiz 2019”, by TATA CRUCIBLE Ranjana N , Disha P, Kokila S, Manasa B N, Sahana V and Pruthvi M 1st March 2019

22

Participated in the “Sweden-India Nobel Memorial Quiz 2018” held at R V College of Engineering , Bengaluru

G Shreya, Kavya C and Shamitha K R

3rd October 2018

23 Participated in Inter-Colligate Climate and Environment Science Quiz-2018 held at IISc, Bengaluru. Preethi K, Tanushree M U, Surabhi M S, Raveena A and S Sumi September 2018
24 Participated in “Triathalon Technical Competition” at VVCE, Mysuru. Kumari Gunjan, Meghana Thowrath V, Preethi K, Anusha S A , Nisha C and Ganavi V Y 8th September 2018

25

Attended “Entrepreneurship Development Camp-2018”, organized by Entrepreneurship Development Cell, at GSSSIETW, Mysuru,.

Aishwarya S, Kumari Gunjan, Meghana Thowrath V, Prateeksha M, Raveena A, Safna M T, Spoorthi M Pawar, S Sumi, Surabhi M S and Tanushree M

5th to 7th September 2018

26

Participated in International symposium on “Traffic Engineering & Management and Disaster Management at NIE, Mysuru.

Simran B A and Lochanna S

31st and Sepetember 1st , 2018

27

Participated in the “Sweden-India Nobel Memorial Quiz 2018” held at R V College of Engineering , Bengaluru

G Shreya, Kavya C and Shamitha K R

3rd October 2018

28

Attended and Cleared “LABView CLAD Level 1” exam conducted by National Instruments(NI) at GSSSIETW, Mysuru.

K J Neena and Pallavi S

23rd July, 2018

 
Students Achievements- 2017-2018:
 

SI. No

Title of the event

Student name

Date

1

Best paper award for the paper titled “Robotic Arm Manipulation Using Shape and Color Based On Visual Servoing” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Anusha G, Ganavi D, Revathi H, Sahana P

7th May 2018

2

Presented a paper titled “Process Control Automation of Paper Pulp Using PLC” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Akshatha K, Apoorva B V, Namratha B Raj, Nandini H M,

7th May 2018

3

Presented a paper titled “Robotic Arm Manipulation Using Shape and Color Based On Visual Servoing” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Anusha G, Ganavi D, Revathi H, Sahana P

7th May 2018

4

Presented a paper titled “Terrain Surveillance & Autonomous Docking Robot” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Beena N, Shweta, Varuni N S, Rashmi G V

7th May 2018

5

Presented a paper titled “Soldier Tracking And Information Gathering System Using GPS ,GSM And Smart Phone” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Anishma P V, Chandana P, Poornima M K

7th May 2018

6

Presented a paper titled “Monitoring of FMS Machine Coolant Motors Using Microcontroller And Bluetooth Module for Easy Troubleshooting” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Najala Nadeem Abdul, Noor Afsha, Prathiba P, Rashmi Rakesh Haval

7th May 2018

7

Presented a paper titled “Wireless Communication Between Engine Test Cell and Console Corridor Control Panel” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Kavana R, Shwetha M, Sushma R, Thejashwini R

7th May 2018

8

Presented a paper titled “Design of Smart ECU for Automobiles” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Bhumika Murthy G, Dikshitha M,Madhushree L C, Navyashree S

7th May 2018

9

,Presented a paper titled “Design and Development of Cyclist Jacket” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Aneesha P, Deepthi M B, Neena K J, Pooja P

7th May 2018

10

Presented a paper titled “Automatic Multi-Level Car Parking System” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Mahima R, Meghashree M D, Pallavi G, Rachana D Nayaka

7th May 2018

11

Presented a paper titled “Gesture Based Human Robot Interaction System Using Raspberry Pi” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Dhanya K M, Naghashree M, Navyashree G S, Poonam Deshpande

7th May 2018

12

Presented a paper titled “Solid Waste Management Using IoT” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Megha Ramesh, N Harshita Subbaiah, Punyashree B S, Rachana Gowda H

7th May 2018

13

Presented a paper titled “Face Recognition And Iot Based Smart Lock Access System” in the Second National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2018) at GSSSIETW, Mysuru

Numitha M N, Taha Noorain, Amulya S Patil, Navyashree H V

7th May 2018

14

Participated in the statewide Engineering IT Quiz TCS Tech Bytes-2018, organized by the board of IT Education Standards (BITES) and Tata Consultancy Services at SJCE, Mysuru

Sushmitha C and Bindya R

March 2018

15

Participated in SDLC Build Project / Web Mania /Green Brain / Code Strom / Word Build as a part of Techno Spectrum, National Level Tehnical Competition, at GSSSIETW, Mysuru

Preethi K

4th April 2018

16

participated in the statewide Engineering IT Quiz TCS Tech Bytes-2018, organized by the board of IT Education Standards (BITES) and Tata Consultancy Services at SJCE, Mysuru on

Hiba Fathima and Vaishnavi Diggavi

March 2018

17

Participated in “CRUCIBLE – The Campus Quiz-2018”, organized by TATA Consultancy at GSSSIETW, Mysuru

Preethi K

20th March 2018

18

TEXPARK-2017, at GSSSIETW, Mysuru

S Sumi, Raveena A, Safna MT, Tanushree MU, Surabi MS, Deepika Gunjan, Meghana V, Raziya Sultana, Swathi M, Vaishnavi D, Swathi M, Sruthi NS, Bindushree, Sufia, Feerha Rafeeque 4th November 2017

19

Quizoholic Inter college quiz competition at VVCE, Mysore

Sushmitha C, Harshitha A S 28th  October 2017

20

Five days National Level workshop on “Applications of Advance Embeded System using Lab-VIEW and Arduino” at ATME, Mysuru

Nagashree M, Dhanya K M, Rachana Gowda H C 27th to 31st October 2017

21

“Climate Change Quiz” at IISc, Bangalore

Vaishnavi Diggavi, Swathi Murlidhar, Bagya Joythi M patil, Simran B A,  Hiba Fathima 4th September 2017

22

IT Olympiad

Dhanya KM, Nagashree M, Prathiba P 9th August 2017
 
Departmental Achievements:
 

Third  National Conference on “Robotics, Automation, Control and Embedded Systems” (NCRACES-2019)

NCRACES-2019 | GSSS Engineering & Technology for Women

NI LabVIEW Academy School

NI LabVIEW Academy School

GSSSIETW had signed an MoU with National Instruments India Pvt. Ltd. LabVIEW licenced software was purchased and a training program was organized for both students and faculty on LabVIEW Core 1 and 2, DAQ training using myDAQ, Robotics using myRIO & ad dons, NI-USRP and CLAD Certification (training and exam). Ms. K J Neena and Ms. Pallavi S, Student's, Dept. of E&IE and Mrs. Pavithra S, Asst. Professor, Dept. of E&IE have cleared their CLAD Certification program. Now GSSSIETW is recognized and awarded as an certified "NI LabVIEW Academy School" on December 4th, 2018. The institute acts as a platform for other engineering college students and faculty who are confident at creating engineering projects on NI platform, building the foundation for student's engineering success in industry or research.

Technical Seminar / Workshops/Industrial Visits organized by Department
 

SL NO

Title Of The Event

Resource Person/Students

Date

2019-2020

1

Webinar on IoT on Digita Transormation in association with Asia Pacific University, Malysia.

Ir. Dr. Alvin Yap, Head of IoT Resesrch center, Asia Pacific University, Malysia

13th August 2020

2

Webinar on Advances in Mobile Robotics in association with Asia Pacific University, Malysia.

Mr. Suresh Gobee - Head of Asia Pacific Robotics Research Centre (APCORE)

15th July 2020

3

Webinar on Industry 4.0.

Mr. Sreekanta Aradhya , Chief Experts, Industry 4.0 , Robert Bosch India Pvt. Ltd., Bengaluru

25th June 2020.

4

Industrial Visit to Bhoruka Alumninium Limited, Mysuru .

4th semester students

13th March 2020

5

Talk on “Competitive Exam” for 6th and 8th semester students.

Ms, Vaishali S, Assistant Manager, Canara bank, Mysuru (alumnae of 2014 batch)

12th March,2020

6

Visit to IISc, Bengaluru.

6th semester students

29th February 2020

7

Industrial Visit to Narayana Hridayalaya, Mysuru.

5th semester students

24th November 2019

8

Technical talk on “Opportunities in Core Industries” for 5th and 7th semester students.

Srinivas Prasad K S, Founder Director , Vaasudev Process management Pvt. Ltd and Aswath N Bhargava, Director, Saadhana Engg. & Business Consulting Service, Bengaluru

4th November

2019

9

Parents-Teachers Meeting

All semester

13th and 14th September 2020

10

Industrial Visit to DMS Technologies, Mysuru.

3rd semester students

24th October 2019

11

One day skill development on “Virtual Instrumentation” for 7th Semester students.

Mrs. Amrutha R and Ms. Deepika T V , Asst. Professor, Dept. of EIE

24th August 2019

12

One day skill development on “Electronics components and devices”

for 3rd Semester students

Mr. Nagesh M S and

Ms. Nagalakshmi T S, Asst. Professor, Dept. of EIE

13th August 2019

 

SL NO

Title Of The Event

Resource Person/Students

Date

2018 - 2019

1

Industrial Visit to CFTRI, Mysuru

4th semester Students

21st May,2019.

2

Parents Teachers Meeting

4th , 6th and 8th semester

11th May 2019.

3

Industrial Visit to Nestle , Nanjangud

6th semester

11th May, 2019

4

Three day workshop on “IoT with Python” for 6th semester.

Mr. Gowtham Raj G, Senior Training manager, Enthu Technologies, Bengaluru.

25th April to 27th April, 2019.

5 Three day workshop on “Field Instruments” at Siemens Centre of Excellence , GTTC, Mysuru for 4th semester. Mr. Jain Jos V Engineer in Technical Services in Designtech Systems GTTC, Mysore 22nd to 24th April, 2019
6 Three day workshop on “C and C++ Programming” for 6th semester Mr. Ramprasad H C , Trainer, 10 Seconds, Bengaluru. 22nd to 24th April, 2019
7 Two days workshop on “IoT using NI Technologies” for 8th semester. Mr. Nagarajan G, Senior Applications Engineer, VI Solutions, Bengaluru. 22nd and 23rd April, 2019.

8

One day workshop on “Analog and Digital Electronics in Embedded System” for 4th semester.

Mr. Santosh Kumar D K, Project Manager, Indhu Design Solution and Technology, Bengaluru

30th March, 2019

9

Technical Talk on “Neural Network and its applications” for 8th semester.

Dr. Ravi Raj Founder Chairman Royal Research Foundation(R), India.

22nd March, 2019

10

Industrial Visit to “Shreeyog Industries”, Dandeli, Karnataka

8th  semester

16th  March, 2019

11

Technical Talk on “Applications in the field of Mechatronics” for 6th  semester.

Mr. Prithvi Perumal Sales Executive – State In charge Seimens Center of Excellence Design Tech Systems Ltd.

9th March, 2019

12

Technical Talk on “Analytical Instrumentation and its Applications”  for 4th semester.

Mr. Anbalgan K Sr. Technician CIFS Dept., CFTRI, Mysuru.

9th March, 2019

13

Control Systems

Dr. ShreeshaChokkadi Professor, MIT, Manipal, Dr.MudduMadakyaru, Asso.Professor, MIT,Manipal, Dr.K V L Narayana, Asso. Professor, VIT, Vellore and Mrs. Nanda S, Asst.Professor, SJCE, Mysuru.

16th to 19th January 2019

14

Industrial Visit to KMF, Mysuru

1st semester Students

6th December 2018.

15

Industrial Visit to Skanray Technologies, Mysuru

7th Semester Students

10th November 2018

16

Parents Teachers Meeting

3rd, 5th and 7th Semester Students

3rd November 2018

17

Technical Talk on Sustainable Living for 1st semester.

Mr. Ramesh Kikkeri.Senior Faculty, Swami Vivekananda Institute of Leadership Development, Bengaluru

27th October 2018

18

Two Days Workshop on Industrial Automation(PLC,SCADA and VFT) for 7th semester.

Mr. Viany Sai and Mr.Dhanushkodi, Application Engineer’s, Axis Global Automation, Bengaluru

26th to 27th October 2018

19

 Technical Talk on “Fundamental Principles of Transducers and Instrumentation” for 3rd semester.

Mr. Chandramouli, Lead Manager, Yokogawa India Ltd., Bengaluru

13th October 2018

20

Technical Talk on “ARM Processor in Industrial Application” for 7th semester.

 Mr. Gurudatt M S, R & D Engineer, Nokia India Pvt. Ltd., Bangalore.

13th October 2018

21

iFEST Meet and Greet-2018

2nd PU Students

4th October 2018

22

iFEST Meet and Greet-2018

2nd PU Students

28th September 2018

23

 Technical Talk on “Application of Process Controllers” for 5th semester.

 Mr. Dhanus Kodi C, Application Engineer, Axis Global Automation, Bengaluru

8th September 2018

24

 Industrial Visit to “Narayana Hridayala”, Mysuru

5th Semester Students 

 6th September 2018

25

Two days workshop on “Industrial Automation in IOT” for 5th semester.

Mr. Ajith R, Application Engineer, AGIIT , Bengaluru

29th and 30th August 2018.

26

 Industrial Visit to Industrial Visit to “ACE Components”, Mysuru

 3rd Semester Students

18th Aug 2018

2017 - 2018

1

Second National Conference on
“Robotics, Automation, Control and Embedded Systems”
(NCRACES-2018)

Smt. Kalpana Arvind, Photonics System Group, LEOS, Bengaluru delivered &
Mr. Benild Joseph, Government of India

7th May 2018 

2

Hands on Training : Robotic Competition “ROBOTEER-2018” Mr. M V Sreenivas Rao, Assoc. Prof, Mr. Nagesh M S & Basavanna M, Asst Prof, Dept. of EIE, GSSSIETW, Mysuru  28th April 2018 

3

 One day Workshop on “Basic Electronics & Instrumentation Devices” Dr. Venkatratnam C, Assoc. Prof. & Head and Mr. Basavanna M, Asst. Prof, Dept. of EIE, GSSSIETW, Mysuru  28th April 2018 

4

Parent Teachers meeting   2nd, 4th & 8th Semester students  28th April 2018

5

 Technical Talk on “Awareness programme on Non Destructive Testing”  Mr. Madhusudhan K T, Senior Member, IRIS, Mysuru 28th April 2018 

6

 

Industrial Visit to “Chemin Controls and Instrumentation Pvt Ltd”
Pondicherry, Tamil Nadu

8th Semester Students   28th April 2018

7

 Five days workshop on “Measurement & Automation using NI myRIO” Mr. Nagarajan G, Senior Applications Engineer VI Solutions, Bangalore  23rd to 27th April 2018 

8

 One day Workshop on “P-Spice Simulation”  Mrs. Pavithra S & Ms. Deepika T V, Asst. Prof, Dept. of EIE, GSSSIETW, Mysuru 21st April 2018 

9

Industrial Visit to Industrial Visit to “Bharat Earth Movers Limited”, Mysuru   2nd Semester Students 21st April 2018 

10

Industrial Visit to Industrial Visit to “Kaynes Pvt. Ltd.”, Mysuru 6th Semester Students 5th April 2018

11

Technical Talk on “ Industrial Perspective”  for 8th Semester Students

Mr. Gururaj Senior Member ISA, Bangalore Section

8th March 2018

12

Industrial Visit to “Central Food Technological Research Institute, Mysuru” 4th Semester Students 28th Fed 2018

13

Technical Talk on
“Analytical Instrumentation and its Application” for 4th Semester Students

Mr. Anbalagan K Senior Technician CFTRI, Mysuru

24th Feb 2018

14

Technical talk on “Nutritional values of different grains & health benefits” Mrs. Shruthi Pandey, Senior Scientist, CFTRI, Mysuru 10th Feb 2018

15

Two days Workshop on “RGBD face Detection and Body tracking using Kinect”,  for 5th Semester Students

Dr. T. Kasar & Mr. Stafford Michahial
Robot Guru, Mysuru.

30th to 31st Jan 2018

16

Three days Workshop on “IT/OT CONVERGENCE” for 3rd Semester Students

Mr. Chandramouli A Lead Manager Customer Service Division Yokogawa India Ltd, Bengaluru.

29th – 31st January 2018

17

Five days workshop on “DAQ Training using myDAQ”  for 7th Semester Students

Mr. Prashanth A Senior Applications Engineer  VI Solutions, Bangalore

8th to 12th January 2018
18

Technical talk on “Recent development in Scaling technology”

Mr. Anil, Design Engineer Infeneon, Bengaluru

28th October 2017
19

Technical talk on “Latest trends in Process Controller”

Mr. Gurudutt M S, Module Lead, Alten Calsoft Labs India Pvt. Ltd., Bengaluru

28th October 2017
20

Technical talk on “Advances in Electronics”

Mr. Santhosh Kumar D K, Embedded Design Engineer, IDS Technologies, Bengaluru

28th October 2017
21

Industrial Visit to “Nestle India Pvt. Ltd”, Nanjangud

Fifth Semester Students

24th October 2017
22

Technical talk on “Industrial Robotics”

Mr. Vijay, Chief Executive Officer, Vuon Technologies, Mysuru

23rd October 2017
23

Technical talk on “Emerging trends in Signal Processing”

Mr. Vinay, Associate Project Manager Robert Bosch, Bengaluru

23rd October 2017
24

Technical talk on “Development of Computers and Instruments (Hardware & Networking) with its Application”

Mr. Radha Krishna, Placement Coordinator, Bosch Skills India, Bengaluru

23rd October 2017
25

Visit to “Susthira - Eco friendly house”, (Nominated as best house of karanataka) Mysuru

First Semester Students

23rd September 2017
26

Industrial Visit to “ACE Components”, Mysuru

Third Semester Students

9th September 2017
27

Technical talk on “Ares of Automation in Pesticide manufacturing”

Mr. K. S. N Prasad, President Pesticides Manufacturers & Formulators Association of Karnataka, Bengaluru

9th September 2017
28

Technical talk on “Recent Development in Hardware & Networking”

Mr. Radha Krishna, Project Coordinator, Bosch Skills India, Bengaluru

9th September 2017
29 Technical talk on “Know your Surroundings – Sustainable Living” Mr. Ramesh S Kikkeri, Senior Faculty, Swami Vivekananda Institute for Leadership Development (VLEAD), Mysore 9th September 2017
30 Technical talk on “Virtual Instrumentation based computer measurement & Control applications” Mr. Kotresh K R, Founder Director, MacMi, Bengaluru 19th August 2017
31 Technical talk on “Fundamental Principles of Transducer & Instrumentation” Mr. Chandramouli, Lead Manager, Yokogawa India Ltd., Bengaluru 19th August 2017
32 Technical talk on “Fundamentals of Programming” Mr. Sai Prasad, Senior Software Engineer, Excel Soft, Bengaluru 19th August 2017
33 Two days Workshop on “IOT” Mr. Vamsi Krishna C H, Business development manager, Rays Technologies, Bengaluru 18th & 19th August 2017
34 Technical talk on “Modern v/s Conventional Electronic Circuits” Mr. Chethan Kumar K, 4G Team Member, Intel Mobile Communication, Bengaluru 12th August 2017
35 Technical talk on “Skill Development Program” The technical talk was delivered by department Faculties 12th August 2017
36 Two days Workshop on “Analog and Digital Electronics” Mr. Santhosh.D.K, Embedded design Engineer, ADS Technologies, Bengaluru 8th & 9th August 2017


 

Placement

 

Placement details 2020-2021 batch  *Placements are still in Progress

EIE Placement details 2020-2021 batch | GSSSIETW

Placement details 2019-2020 batch

EIE Placement details 2019-2020 batch | GSSSIETWUntitled

Placement details 2018-2019 batch

EIE Placement details 2018-2019 batch | GSSSIETW

Companies visiting the Department

 EIE Company List

ISOI

Instrument Society of India

Instrument Society of India

The Society of Instrumentation professionals was established in the year 1970, with head quarters at Indian Institute of Science, Bangalore. Today it has six chapters at Delhi, Chennai, Hyderabad, Dehradun, Pune and Cochin. It strives to act as a link between academic institutions and the instrumentation industry, by organizing several programs. It also conducts programs for students and working professionals in the form of short term courses, symposia and topical reviews.

The objectives of Instrument Society of India are:

  1. To provide a forum for pooling the knowledge and experience of individuals in promoting development of instruments and instrumentation systems.
  2. To act as an exchange bureau for dissemination of technical information by way of periodic and special publications, appraising the technical and scientific personnel in the industries as well as in research institutions, of the requirements in the field of instrumentation by the industries and the educational and scientific institutions mutually.
  3. To organize liaison between interested entrepreneurs with technical problems in their instrumentation activities and the experts who offer to act as consultants.

The benefits of becoming member of Institutional Life Membership are:

  1. Free journal copy throughout lifetime.
  2. One registration fee free for attending Int. /national conference/ symposium organized by ISOI for one of the faculty member of the institution.
  3. 25% concession in registration fee on short term courses/workshops organized by ISOI for one of the faculty member of the institution.

SL NO

Title Of The Event

Resource&Person/Students

Date

2020-2021

1

Presented paper titled "Live Video surveillance with mine and Intruder detection combat Robot" in National Symposium on Instrumentation (NSI-42) organized by Instrument Society of India (ISOI)

Ms.MeghanaThorwath V

January 2021

2

Presented paper titled "Green House monitoring and Control System using IoT" in National Symposium on Instrumentation (NSI-42) organized by Instrument Society of India (ISOI)

Ms.Shreelakshmi H S

January 2021

3

Presented a Poster titled "Smart Reverse Vending Machine to feed Stray Dogs" in National Symposium on Instrumentation (NSI-42) organized by Instrument Society of India (ISOI)

Ms.Tanushree M U

January 2021

4

Technical Webinar on "Innovation and Current Trends in Automotive industry" for V and VII semester students

Mr. Chandramouli Ananthamurthy, Lead Manager, Yokogawa India Ltd, Bengaluru

21th December 2020

5

Technical Webinar on "Application of Controllers in Process Industries"

V and VII semester students

7th December 2020

6

Webinar on "Programming Basics with C/C++"

Mr. Nishant, Technical Architect, TCS UK Insurance Group

7th November 2020

7

Webinar on "Designing of layout for Electronic equipments using VLSI Design"

Ms. Nagashree M, Layout Design Engineer, Frenus Tech, Bengaluru.

26th October 2020

8

First global alumnae meet

Alumnae joined the meeting from the various regions of India and abroad

9th May 2020

9

Robotic Workshop & "Roboteer-2020" for Diploma students on

Mr. Nagesh M S, Assistant Professor, GSSSIETW, Mysuru

28th&January 2020

10

Robotic Workshop& "Roboteer-2019" for Pre-University students

Mr. Nagesh M S, Assistant Professor, GSSSIETW, Mysuru

14th November 2019

2019-2020

1

Webinar on IoT on Digita Transormation in association with Asia Pacific University, Malysia.

Ir. Dr. Alvin Yap, Head of IoT Resesrch center, Asia Pacific University, Malysia

13th August 2020

2

Webinar on Advances in Mobile Robotics in association with Asia Pacific University, Malysia.

Mr. Suresh Gobee - Head of Asia Pacific Robotics Research Centre (APCORE)

15th July 2020

3

Webinar on Industry 4.0.

Mr. Sreekanta Aradhya , Chief Experts, Industry 4.0 , Robert Bosch India Pvt. Ltd., Bengaluru

25th June 2020.

4

Industrial Visit to Bhoruka Alumninium Limited, Mysuru .

4th semester students

13th March 2020

5

Talk on “Competitive Exam” for 6th and 8th semester students.

Ms, Vaishali S, Assistant Manager, Canara bank, Mysuru (alumnae of 2014 batch)

12th March,2020

6

Visit to IISc, Bengaluru.

6th semester students

29th February 2020

7

Industrial Visit to Narayana Hridayalaya, Mysuru.

5th semester students

24th November 2019

8

Technical talk on “Opportunities in Core Industries” for 5th and 7th semester students.

Srinivas Prasad K S, Founder Director , Vaasudev Process management Pvt. Ltd and Aswath N Bhargava, Director, Saadhana Engg. & Business Consulting Service, Bengaluru

on 4th November

2019

9

Industrial Visit to DMS Technologies, Mysuru.

3rd semester students

24th October 2019

10

One day skill development on “Virtual Instrumentation” for 7th Semester students.

Mrs. Amrutha R and Ms. Deepika T V , Asst. Professor, Dept. of EIE

24th August 2019

11

One day skill development on “Electronics components and devices” for 3rd Semester students

Mr. Nagesh M S and Ms. Nagalakshmi T S, Asst. Professor, Dept. of EIE

13th August 2019

 

Sl. No.

TITLE OF THE EVENT

RESOURCE PERSON / STUDENTS

DATE

2019

1

Industrial Visit to Narayana Hridayalaya, Mysuru

5th semester

24th November 2019

2

Technical talk on “Opportunities in Core Industries” for 5th and 7th semester students

Srinivas Prasad K S, Founder Director , Vaasudev Process management Pvt. Ltd and Aswath N Bhargava, Director, Saadhana Engg. & Business Consulting Service, Bengaluru.

4th November 2019

3

Industrial Visit to DMS Technologies, Mysuru

3rd semester

24th October 2019

4

Roboteer-2019

Inter college event

1st October 2019

5

One day skill development on     “ Virtual Instrumentation” for 7th Semester

Mrs. Amrutha R and Ms. Deepika T V

24th August 2019

6

One day skill development on  “Electronics components and devices” for 3rd  Semester

Mr. Nagesh M and Ms. Nagalakshmi T S

13th August 2019

7

Five days FDEP on “Digital Image Processing”

Dr. Narasimha Kaulgud , Professor, Dept. of ECE, NIE, Mysuru, Dr. Raghavendra U Asso. Professor,

Dept of I&C, MIT, Manipal. Dr. Thotreingam Kasar Vice President of Research Kaaya Tech, Mysuru,

Dr. Anjan Gudigar , Asst. Professor, Dept of I&C, MIT, Manipal,

Mrs. Nanda S Asst. Professor, Dept of E&IE, SJCE, Mysuru

8th to 12th July 2019

8

Three day workshop on “IoT with Python” for 6th semester.

Mr. Gowtham Raj G, Senior Training manager, Enthu Technologies, Bengaluru.

25th April to 27th April, 2019.

9

Three day workshop on “Field Instruments” at Siemens Centre of Excellence , GTTC, Mysuru for 4th semester.

Mr. Jain Jos V Engineer in Technical Services in Designtech Systems GTTC, Mysore

22nd to 24th April, 2019

10

Three day workshop on “C and C++ Programming” for 6th semester

Mr. Ramprasad H C , Trainer, 10 Seconds, Bengaluru.

22nd to 24th April, 2019

11

Two days workshop on “IoT using NI Technologies” for 8th semester.

Mr. Nagarajan G, Senior Applications Engineer, VI Solutions, Bengaluru.

22nd and 23rd April, 2019.

12

One day workshop on “Analog and Digital Electronics in Embedded System” for 4th semester.

Mr. Santosh Kumar D K, Project Manager, Indhu Design Solution and Technology, Bengaluru

30th March, 2019

13

Technical Talk on “Neural Network and its applications” for 8th semester.

Dr. Ravi Raj Founder Chairman Royal Research Foundation(R), India.

22nd March, 2019

14

Technical Talk on “Applications in the field of Mechatronics” for 6th  semester.

Mr. Prithvi Perumal Sales Executive – State In charge Seimens Center of Excellence Design Tech Systems Ltd.

9th March, 2019

15

Technical Talk on “Analytical Instrumentation and its Applications”  for 4th semester

Mr. Anbalgan K Sr. Technician CIFS Dept., CFTRI, Mysuru.

9th March, 2019

2018

 1 Technical Talk on Sustainable Living for 1st semester students  Mr. Ramesh Kikkeri.Senior Faculty, Swami Vivekananda Institute of Leadership Development, Bengaluru  27th October 2018
 2  Two Days Workshop on Industrial Automation(PLC,SCADA and VFT) for 7th semester students  Mr. Viany Sai and Mr.Dhanushkodi, Application Engineer’s, Axis Global Automation, Bengaluru  26th to 27th October 2018
 Technical Talk on “Fundamental Principles of Transducers and Instrumentation” for 3rd semester students.  Mr. Chandramouli, Lead Manager, Yokogawa India Ltd., Bengaluru  13th October 2018
 4  Technical Talk on “ARM Processor in Industrial Application” for 7th semester students.  Mr. Gurudatt M S, R & D Engineer, Nokia India Pvt. Ltd., Bangalore.  13th October 2018
 Technical Talk on “Application of Process Controllers” for 5th semester students.  Mr. Dhanus Kodi C, Application Engineer, Axis Global Automation, Bengaluru  8th September 2018
 Two days workshop on “Industrial Automation in IOT”  for 5th semester students.  Mr. Ajith R, Application Engineer, AGIIT , Bengaluru  29th and 30th August 2018.

7

Second National Conference on

“Robotics, Automation, Control and Embedded Systems”

(NCRACES-2018)

Smt. Kalpana Arvind, Photonics System Group, LEOS, Bengaluru delivered &

Mr. Benild Joseph, Government of India

7th May 2018

8

Hands on Training : Robotic Competition “ROBOTEER-2018”

Mr. M V Sreenivas Rao, Assoc. Prof, Mr. Nagesh M S & Basavanna M, Asst Prof, Dept. of EIE, GSSSIETW, Mysuru

28th April 2018

9

One day Workshop on “Basic Electronics & Instrumentation Devices”

Dr. Venkatratnam C, Assoc. Prof. & Head and Mr. Basavanna M, Asst. Prof, Dept. of EIE, GSSSIETW, Mysuru

28th April 2018

10

Technical Talk on “Awareness programme on Non Destructive Testing”

Mr. Madhusudhan K T, Senior Member, IRIS, Mysuru

28th April 2018

11

Five days workshop on “Measurement & Automation using NI myRIO”

Mr. Nagarajan G, Senior Applications Engineer VI Solutions, Bangalore

23rd to 27th April 2018

12

One day Workshop on “P-Spice Simulation”

Mrs. Pavithra S & Ms. Deepika T V, Asst. Prof, Dept. of EIE, GSSSIETW, Mysuru

21st April 2018

13

Technical Talk on

“ Industrial Perspective”

for 8th Semester Students

Mr. Gururaj

Senior Member

ISA, Bangalore Section

8th March 2018

14

Technical Talk on

“Analytical Instrumentation and its Application” for 4th Semester Students

Mr. Anbalagan K

Senior Technician

CFTRI, Mysuru

24th Feb 2018

15

Technical talk on “Nutritional values of different grains & health benefits”

Mrs. Shruthi Pandey, Senior Scientist, CFTRI, Mysuru

10th Feb 2018

16

Two days Workshop on

“RGBD face Detection and Body tracking using Kinect”,

for 5th Semester Students

Dr. T. Kasar &

Mr. Stafford Michahial

Robot Guru, Mysuru.

30th to 31st Jan 2018

17

Three days Workshop on

“IT/OT CONVERGENCE”

for 3rd Semester Students

Mr. Chandramouli A

Lead Manager

Customer Service Division

Yokogawa India Ltd, Bengaluru.

29th – 31st January 2018

18

Five days workshop on

“DAQ Training using myDAQ”

for 7th Semester Students

Mr. Prashanth A

Senior Applications Engineer

VI Solutions, Bangalore

8th to 12th January 2018

 

Sl.

No

Title of the Event

Resource Person / Students

Date

2017

1

Technical talk on “Recent development in Scaling technology”

Mr. Anil, Design Engineer Infeneon, Bengaluru

28th October 2017

2

Technical talk on “Latest trends in Process Controller”

Mr. Gurudutt M S, Module Lead, Alten Calsoft Labs India Pvt. Ltd., Bengaluru

28th October 2017

3

Technical talk on “Advances in Electronics”

Mr. Santhosh Kumar D K, Embedded Design Engineer, IDS Technologies, Bengaluru

28th October 2017

5

Technical talk on “Industrial Robotics”

Mr. Vijay, Chief Executive Officer, Vuon Technologies, Mysuru

23rd October 2017

6

Technical talk on “Emerging trends in Signal Processing”

Mr. Vinay, Associate Project Manager Robert Bosch, Bengaluru

23rd October 2017

7

Technical talk on “Development of Computers and Instruments (Hardware & Networking) with its Application”

Mr. Radha Krishna, Placement Coordinator, Bosch Skills India, Bengaluru

23rd October 2017

10

Technical talk on “Ares of Automation in Pesticide manufacturing”

Mr. K. S. N Prasad, President Pesticides Manufacturers & Formulators Association of Karnataka, Bengaluru

9th September 2017

11

Technical talk on “Recent Development in Hardware & Networking”

Mr. Radha Krishna, Project Coordinator, Bosch Skills India, Bengaluru

9th September 2017

12

Technical talk on “Know your Surroundings – Sustainable Living”

Mr. Ramesh S Kikkeri, Senior Faculty, Swami Vivekananda Institute for Leadership Development (VLEAD), Mysore

9th September 2017

13

Technical talk on “Virtual Instrumentation based computer measurement & Control applications”

Mr. Kotresh K R, Founder Director, MacMi, Bengaluru

19th August 2017

14

Technical talk on “Fundamental Principles of Transducer & Instrumentation”

Mr. Chandramouli, Lead Manager, Yokogawa India Ltd., Bengaluru

19th August 2017

15

Technical talk on “Fundamentals of Programming”

Mr. Sai Prasad, Senior Software Engineer, Excel Soft, Bengaluru

19th August 2017

16

Two days Workshop on “IOT”

Mr. Vamsi Krishna C H, Business development manager, Rays Technologies, Bengaluru

18th & 19th August 2017

17

Technical talk on “Modern v/s Conventional Electronic Circuits”

Mr. Chethan Kumar K, 4G Team Member, Intel Mobile Communication, Bengaluru

12th August 2017

18

Technical talk on “Skill Development Program”

The technical talk was delivered by department Faculties

12th August 2017

19

Two days Workshop on “Analog and Digital Electronics”

Mr. Santhosh.D.K, Embedded design Engineer, ADS Technologies, Bengaluru

8th & 9th August 2017

20

3 day Faculty Development Programme on

“Current Research Trends in Autonomous Robotics”

Mr. Nagendra R Setty, Founder & CEO, Ideas Unlimited, Mysuru

17th to 19th July 2017

21

Two days Workshop on “Field Instrumentation in Process Control”

Mr. Jijo Christo, Mr. Abhiram kumar T and Mr. P Harish Reddy, Application Engineers, AGIIT, Bengaluru

15th & 16th May 2017

22

Project Symposium for 8th Semester Students

Priya M P, Associate business analyst, Sowmya M S, Asst prof., JSSATE and Ashwini G, Project engineer trainee

27th May 2017

23

Inter College Robotic Competition “ROBOTEER-2017”

All Semester Students

25th May 2017

24

National Conference on “Robotics, Automation, Control and Embedded Systems” (NCRACES-2017)

Mr. Rajeev Raghunath, Founder & CEO, Kramah Software India Pvt. Ltd, Bengaluru

22nd May 2017

25

Two days Workshop on “Field Instrumentation in Process Control” by AGIIT

Mr. Jijo Christo, Mr. Abhiram kumar T and Mr. P Harish Reddy, Application Engineers, AGIIT, Bengaluru

15th & 16th May 2017

27

Technical talk on ‘Neural Network and its Applications’

Dr. S Raviraja, Founder Chairman, Royal Research Foundation, India.

22nd April 2017

28

Technical talk on ‘Analytical Instrumentation and its Application’

Mr. Anbalagan K, Sr. Technician, CFTRI, Mysore

22nd April 2017

29

Technical talk on ‘Analytical Instrumentation and its Application’

Mr. Anbalagan K, Sr. Technician, CFTRI, Mysore.

22nd April 201

31

Technical talk on ‘Embedded Systems & its Applications’

Mr. Naveen B R Sindhe, Technical Specialist, Philips, Bengaluru.

11th March 2017

32

Technical talk on ‘Innovation in Automation Industries’

Mr. Anil Kumar HP, Manager, Agraj Automation, Bengaluru

11th March 2017

33

Five days Workshop on “LabVIEW Core 1 & Core 2” by National Instruments held during

Mr. Kotresh .K. R, Senior Applications Engineer, VI Solutions, Bengaluru.

3rd to 7th February 2017

34

A Memorandum of Understanding (MOU) was signed between GSSSIETW, Mysuru and “NI Systems India Pvt Ltd.,”

NI Systems India Pvt Ltd

February 2017

35

Two days Workshop on “Basics of Arduino Board & Programming”

Mr. M V Sreenivas Rao, Associate Professor, and Mr. Stafford Michahial, Assistant Professor, Dept. of IT, GSSSIETW, Mysuru

13th and 16th January 2017

36

Three days Workshop on “Project Based Learning using Raspberry-Pi with IOT”

Mr. Mathivanan Balakrishnan, Technical Manager, Enthu Technology Solutions India Pvt, Ltd, Coimbatore

9th to 11th January 2017

 

2016

1

Technical talk on "Functional elements of Sensors & Transducers".

Mr. Joshua Rajkumar Application Engineer AGIIT, Bengaluru

06/08/2016

2

Technical talk on "Professional Graded PCBs".

Dr. Shivakumar Production & Head, Wet Process AT&S, Mysuru.

06/08/2016

3

Technical talk on "Recent trends in Automation".

Mr. Ganesh Kiran Software & test Lead Engineer, L&T, Bengaluru.

06/08/2016

4

Technical talk on "Robotics & Control".

Dr. Sreekanta Guptha B P  Principal Consultant,  Infosys BPO, Mysuru

27/08/2016

5

Technical talk on "Digital System Design".

Mr. Gurjeeth Singh Manager, Gill Instruments, Bengaluru

10/09/2016

6

Technical talk on "Voice Disorders".

Dr. Y V Geetha Professor of speech sciences AIISH, Mysuru

10/09/2016

7

Technical talk on "Application of Instrumentation in Food Industry".

Dr. V A Sajeevkumar Food Engineering & Packing Scientist F, DFRL, Mysuru

24/09/2016

8

Technical talk on "Virtual Instrumentation".

Mr. Manimaran Sr. Application Engineer VI Solutions, Bengaluru

08/10/2016

11

Technical talk on "Raspberry-Pi".

Mr. Moorthi Application Engineer Enthu Technologies, Coimbatore

22/10/2016

12

Technical talk on "Imaging Modalities".

Dr. Sanjay Kumar P Radiologist JSS Medical Hospital, Mysuru

22/10/2016

14

Project Symposium

8th  Semester students

06/05/2016

16

Technical Talk on “ Sensor Application in Automation Industries ”

Mr. Vimal Raj,Application Engineer,Axis Global Automation,Bengaluru.

02/04/2016

18

Workshop on   “Digital Image Processing”

Mr. Vallabha,  Software Manager, Texas Instruments, Bengaluru.

01/04/2016 & 02/04/2016

19

Technical Talk on “ Thin Film Technology for Sensor Development”

Dr. K Rajanna, Professor & Chairman Dept. of Instrumentation Indian Institute of Science (IISc), Bengaluru.

12 /03/2016.

20

Technical Talk on “Fundamental of Embedded System”

Mr. N S Geethesh, Chief Operating Officer, METI Numerical Systems Pvt Ltd, Mysuru.

27/02/2016

21

Mini Project Symposium

8th Semester students

13/02/2016

22

Technical talk on “Industrial Instrumentation”

Resource person of the Training Mr. Chandramouli, Technical Lead Manager, Yokogawa india Limited, Bengaluru

13/02/2016

23

Five days workshop on “Distributed Control System” For 7th semester students.

Mrs. Deepthi Assistant Manager, & Pavitra, Executive Engineer , Customer Service Division Yokogawa India Limited,
Bengaluru

5/01/2016 -11/01/2016

24

Two days Workshop on “Tech Tree Training Program” For 3rd semester students of IT,ECE,EEE,TE

Mr.Gurjith Singh, Managing Director, Gill Instruments, Bengaluru

04/01/2016 -05/01/2016

25

Two days Workshop on “Tech Tree Training Program” For 3rd semester students of IT,ECE,EEE,TE

Mr.Gurjith Singh, Managing Director, Gill Instruments, Bengaluru

04/01/2016 & 05/01/2016

26

Five days workshop on “Distributed Control System” For 7th semester students.

Mrs. Deepthi Assistant Manager, & Pavitra, Executive Engineer, Customer Service Division Yokogawa India Limited, 
Bengaluru

5/01/2016  to 11/01/2016

 

News Letters

 

EIE_Annual report 2019-2020 : Click Here

Departmental News Letter EVEN semester 2019 : Click Here

Departmental News Letter ODD semester 2018 : Click Here

Departmental News Letter EVEN semester 2018 : Click Here 

Departmental News Letter ODD semester 2017  : Click Here 

Gallery

Webinar on IoT.jpgWebinar on Robotics.jpegIndustrial visit_Bhoruka Ltd_13 March 2020.jpgVisit to IISc_29 Feb 2020.jpgWebinar on Industry 4.0.jpgGlobal Alumnae Meet 2020.jpgTalk on Competative exam_12 March 2020.jpg

PT Meeting ODD 2019Skill Development AEC 3rd sem 13th Aug 2019Industrial Visit_3rd sem DMS 25th Oct 2019Technical Talk Opportunities in core industries 4th Nov 2019Industrial visit NH 5th sem 25th November 2019Skill development VI 7th sem 24th Aug 2019

Chief guest FDEP DIPFDEP DIP Participants group photoFDEP DIP Inauguration

Industrial visit CFTRI May 21st 4th semester Field Instruments GTTCNestle visit 11th May 2019PT Meeting Even 2019Group Photo Industrial visit CFTRI 4th semester 2019Nestle visit 11th May 2019Workshop Field Instruments group photo Even 2019PT Meeting Even 2019


 

Third  National Conference on “Robotics, Automation, Control and Embedded Systems” (NCRACES-2019).

NCRACES 2019 Chief Guest Session ChairsNCRACES-2019 Guest of Honor FelicitationNCRACES-2019 Proceedings ReleaseNCRACES-2019_Cheief Guest_FelicitationNCRACES-2019 Lighting LampNCRACES-2019 Chief Guest with Participants

 


 

IoT with Python workshop 8th sem Workshop IoT-NI Technologies 22nd and 23rd AprilIndustry vist 8 sem Shreeyog Industry Dandeli Grp Photo 6th Mechatronics Tech Talk-22-03-19 IoT with Python workshop14th sem Tech Talk 22nd March -19Tech talk Neural Network 22nd March 2019 6th sem Group PhotoIoT with Python workshop 25-27 April 20196th sem CandC workshop  April 22 to 24th 2019Workshop on AECGroup photo 4th sem AEC Workshop 30-03-198th sem Tech talk Group photo NN 22nd March 2019

 


 

ELECTRONICS & INSTRUMENTATION ENGINEERINGELECTRONICS & INSTRUMENTATION ENGINEERING ELECTRONICS & INSTRUMENTATION ENGINEERING ELECTRONICS & INSTRUMENTATION ENGINEERING ELECTRONICS & INSTRUMENTATION ENGINEERING ELECTRONICS & INSTRUMENTATION ENGINEERING 2nd PUC Event | October 20183rd Sem_ODD 2018_Technical Talk_13th Oct 20182nd PUC Event | October 20182nd PUC Event | October 20182nd PUC Event | October 2018Work shop_PLC SCADA_ODD 20182nd PUC Event | October 20182nd PUC Event | October 2018Industrial Visit KMF_22nd PUC Event | October 20182nd PUC Event | October 20182nd PUC Event | October 2018Skanray_Industrial_Visit_7th Sem_10th Nov 2018Industrial Visit_KMF_6th Dec 20187th Sem_ODD 2018_Technical Talk_13th Oct 20182nd PUC Event | October 20182nd PUC Event | October 20182nd PUC Event | October 20187th sem_Workshop_ODD 20182nd PUC Event | October 20181st sem_Technical_Talk_27th Oct 2018


 

Electronics & Instrumentation EngineeringElectronics & Instrumentation EngineeringElectronics & Instrumentation EngineeringElectronics & Instrumentation EngineeringElectronics & Instrumentation EngineeringElectronics & Instrumentation Engineering


 

Electronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering ActivitiesElectronics & Instrumentation Engineering Activities


 

Project Symposium5 Days Workshop on Programmable Logic Controller SCADADepartment of EIE of GSSSIETW Mysuru is signing a MoU with Yokogawa India Ltd Bengaluru5 Days Workshop on Distributed control systemTechnical talk on Medical ImagingTechnical talk on Robotics


 

0eaa41ed-c76b-4757-b241-62f58250e7e4.jpg5ade5db5-e2ae-4ff2-a565-286c8bae0dad.jpg9ba7be43-dbd5-47e4-8b21-bc71b42ed86c.jpg867780b3-7cfc-4b3f-b0f9-03441cf7553c.jpgf3578265-da27-45a5-9fdd-57be41736bb6.jpgf6a1ec8b-b330-4604-8b02-4f73c8138ad7.jpg795b0e1a-5c3e-4020-a62f-1e3aa797924f.jpg9fd8f8b1-4ef6-4907-abb6-5acd3ff91453.jpg

For More Photos

 Click Here Icon


AdmirorGallery 4.5.0, author/s Vasiljevski & Kekeljevic.
© 2014 | GSSS Institute of Engineering and Technology for Women